hillvert Submersible pump - 8.5 m³/h - 7 m - 550 W - float switch HT-SPP-550W-8500

69,00 GBP

Description

Submersible pumps are indispensable for emergency drainage. By quickly pumping out flooded rooms, you keep water damage to a minimum. With the submersible pump from hillvert, you can quickly transport clean water from cellars, rainwater tanks, ponds, swimming pools and wells. The powerful, hermetically sealed motor of the pool pump works with 550 W. This means that the device pumps a volume of up to 8.5 m³ per hour. The pumping depth is 7.5 m. With an immersion depth of 7 m, the pump is also suitable for deep wells. It sucks in particles with a size of up to 5 mm without any problems. The hillvert submersible pressure pump is particularly robust. The casing is made of stainless steel and is therefore corrosion-resistant and dirt-repellent. The pump masters even the highest demands reliably. In addition, you remain flexible thanks to the 10 m long power cable. With the practical float switch, the pump switches on and off automatically - depending on the water level. The lowest water level for commissioning is 35 mm. If the water level drops too low, the device will switch off. As the water level increases, the pump resumes operation. The pump sucks up to a water level of 11 mm. Thanks to the practical multiple connection, you can easily connect different hose sizes. The pump is suitable for the following connections: 1"; G1"; 1 1/4"; G1 1/4".